1.Mic Control Unit – VL2380S
Mode: Mode setting of 3 options.
NORMAL: Default Mode. When the mics reach its max allowed numbers, new mic works only when the previous mic is powered off.
FIFO: When the mics reach its max allowed numbers, new mic will work by turning off the previous mic to keep all mics within allowed numbers.
VOICE: Voice activation. The mic will automatically be on when participant speaks close to the mic, and mic will be off when participant stops. This model is only for mics that support voice activation.
EQ: Frequency shifter that can adjust EQ and help stop mic noise. It’s an optional unit.
UNIT: Max allowed numbers for speaking delegates. There is 1/2/4/6 for option.
VOLUME.
IN: Audio sound input
OUT: Audio sound output
DELEGATES: Port for mic connection. Support 3 channels, max 90 units of mic.
CONTROL SYSTEM: DB9-pin port for central control device
PC: PC connection port
Set IDSET ID: ID setting of mics
Power on/off
Power input: AC100V–240V 50/60Hz
Earthing screw
1. Power: Power on/off
2. Mode: Mode setting of 3 options.
NORMAL: Default Mode. When the mics reach its max allowed numbers, new mic works only when the previous mic is powered off.
FIFO: When the mics reach its max allowed numbers, new mic will work by turning off the previous mic to keep all mics within allowed numbers.
VOICE: Voice activation. The mic will automatically be on when participant speaks close to the mic, and mic will be off when participant stops. This model is only for mics that support voice activation.
3. EQ: Frequency shifter that can adjust EQ and help stop mic noise. It’s an optional unit.
4. UNIT: Max allowed numbers for speaking delegates. There is 1/2/4/6 for option.
5. BASS.
6. TREBLE.
7. VOLUME.
IN: Audio sound input
OUT: Audio sound output
DELEGATES: Port for mic connection. Supports 3 channels, max 90 units of mic.
CONTROL SYSTEM: DB9-pin port for central control device.
1.PC. PC CONNECTION PORT.
SET ID. ID setting of Mics.
Each mic should match one ID only. But customer may receive mics of same ID because of different production lots.When there are 2 or more units sharing same ID, they will be recognized to be same unit by mic control unit and will work together. Then we need to reset ID as below steps to avoid this issue.
A. Connect all mics and mic control unit as a whole system, then power on the mic control unit.
B. Turn SET ID to be” ON” status, then press Mic ON button one after another, until all mics are switched on with the lamp(next to the mic on/off button) is lighting. Then ID is reset.
C. All Mic lamp( lamp on mic panel) will be on if all ID are reset.
D. Turn the back side of SET ID to be” OFF” status,
E. Re-power on the mic control unit, then all ID reset is finished and ready for use.
Power input. AC 100V-240V, 50/60Hz.
Earthing screw.
Mic connection port
BREAK/MIC
◆ Break delegate’s mic 📶 Mic on/off.
When the mic is fixed on monitor lift as a whole unit, there isn’t icon on the button as it’s not able to laser the buttons on lift. Please refer to this instruction before use.
President’s Mic has the priority to speak and press ◆ for 2 seconds will stop delegates’ Mic.
Features:
President Mic has the power to control the order of the whole meeting.
Power to mic is from Mic control unit of DC 24V.
President mic can position in anywhere by daisy chain connection.
Don’t limit by max allowed numbers for speaking delegates.
Parts
A. Cable Splitter (Option unit)
The MAG Microphone Auto Booster employs AFC (Adaptive Feedback Cancellation) technology and AGC (Automatic Gain Control) technology.
It’s developed due to the following concerns:
Short microphone pickup distance
Low volume and weak on-site sound reinforcement
High complexity and costly equipment tuning
Significant audio quality degradation caused by existing feedback suppressors
This device abandons traditional outdated feedback suppressors or frequency shifters to eliminate howling. While such technologies can marginally increase system transmission gain (2–3 dB), their limited chip processing capabilities cause noticeable voice distortion and pitch alteration, directly degrading sound quality. Instead, the MAG2000 utilizes an intelligent dynamic feedback filter. Leveraging next-generation high-speed floating-point processing for feedback elimination, it effortlessly boosts system transmission gain by 11 dB—2–3 times higher than conventional devices—while preserving original sound quality.
Significantly extends microphone pickup distance** – Doubles or triples the effective pickup range at equivalent sound pressure levels;
Dramatically enhances sound reinforcement** – Increases sound pressure level by over 11 dB at identical distances;
Plug-and-play operation** – No software tuning required. With self-adaptive feedback algorithms, the system achieves stable feedback-free operation within 10–30 seconds after connection, delivering an 11 dB transmission gain increase;
Zero audio quality compromise – Maintains lossless sound reproduction for both human voices and music.
Debugging Key Points
Two Connection Methods for MAG2000:
① Direct connection: Microphone signals from the mixer/daisy-chained conference host → MAG2000 → Processed signals output to downstream devices (e.g., mixing console, media matrix).
② Parallel connection: Send microphone signals via console group output → MAG2000 → Processed signals return to console → Amplifier.
For Daisy-Chained Conference Systems/Condenser Mics:
Disable built-in feedback suppression in conference hosts/mixers (some high-end mixers include DSP processing). If unable to disable, connect to unprocessed auxiliary outputs to avoid sampling errors affecting performance.
System Stability:
Avoid operating at threshold limits. Maintain 2–3 dB headroom to ensure stability during unexpected events (e.g., object drops, sudden loud sounds).
| Sampling Rate: | 48K |
|---|---|
| Frequency Response : | 20Hz-20KHz |
| Channel Noise: | <-90dBu |
| Dynamic Range: | 99dBu |
| Debugging Mode : | Self-adaptive (zero-tuning required) |
| I/O Interface: | Tool-free terminal blocks |
| Voltage: | 60~306V AC 50~60Hz |
| Power plug: | Any type |
| Input: | 2× balanced line-level (XLR/TRS combo) |
| Output: | 2× balanced (XLR) |
| Dimensions (W×D×H) : | 482 mm x 239 mm x 50 mm |
| Operating Temperature : | 0 - 50 degree |
SP-0110 is a 1-input 10-output HDMI splitter, widely used in various AV
projects such as conference centers, video conferencing, virtual
simulation centers, and image displays, among many signal sources.
Supports 1 input and 10 output signal distribution
Thepower sequencer features a 2-inch color TFT screen that displays real-time voltage, time, channel
status, scene modes, and cascade status. It provides 8 high-power output channels with under-voltage
and over-voltage detection and alarm functions. The device supports timed power-on/off, saving and
recalling preset scenes, and individual control (including switching and delay) for each channel. Equipped
with an RS232 interface, it can be controlled by a central control system. Multiple units can be cascaded,
with automatic device ID detection and configuration, supporting up to 256 units in a cascaded setup.
Each device has its own ID setting and detection, which can realize remote centralized control.
10 Set of devices switch scene data saving/invocation, scene management application is
simple and convenient
| Model No. | CS-M8L |
|---|---|
| Input Voltage | AC220V/50Hz |
| Rated Power | 6000W/30A |
| 1- way Power | 2000W |
| Power cable | 3*4 ² cable |
| Display screen | 2” TFT screen |
| Input mode | 3*2.5² AC power cable, allow connection to air switch |
| UV/OV Protection | Under voltage (120-190V) Over voltage (240-290V) |
| Time setting | Day/Week repeat |
| Switch/indicator | Each way support manual on/off, and status displays on screen |
| Product Dimension | 480*290*44mm |
HDMI0808-S is a 2Kultra-high-definition HDMI matrix , featuring 8-channel input and output. Users can control it remotely through a central control system or set the signal source input order in advance using various control methods. The 2K HD matrix is widely used in various AV projects involving multiple signal sources, such as command centers, dispatch centers, analysis centers, conference centers, video conferencing, virtual simulation centers, and image displays.
Input interfaces: 8 HDMI-A female interfaces, 1 RS-232, 1 LAN port
Output interfaces: 8 HDMI-A female interfaces
Signal type: All digital T.M.D.S. signal, supports EDID management
Supported resolution: Up to 4K@30Hz resolution, backwards compatible
Maximum transmission delay: 5nS (±1nS)
Switching speed: Less than 200ns (maximum time)
Power supply: AC100V~240V, 50/60Hz
Maximum power: 50W
Operating temperature: -20°~70°C
Operating humidity: 10%~90%
Mean time between failures: 30,000 hours
Dimensions (W×D×H): 485×245×66mm
Video Wall Bracket (POP-OUT Video Wall Mount)
Motorized Height Adjustable Mobile Stand
Swivel Bracket for 37"-80" Flat Panel TVs
Economical Full-Motion TV Wall Mount
The ANSBR2355 is an Economical Full-Motion TV Wall Mount which accommodates most of 23″-55″ flat-panel TVs with a load up to 30kg/66lbs. Its full-motion capabilities allow a +5°～-8° tilting and a +90°~-90° swivelling of your TV, which maximizes the flexibility for easy viewing from different angles in the room. The integrated cable clip keeps cables organized and protected.
